QR Hub
BlogScan a codePricing
Englishen
Sign inStart free
← All articles

What size should a QR code be? A simple print size guide

How big to print a QR code so it scans every time — minimum size, a size table for cards, flyers, posters and signs, the quiet zone, and how to test before you print.

QR Hub team · 20 November 2026 · 7 min read

Also in:DeutschFrançais

You've made a QR code and now it has to go on something real: a business card, a table tent, a flyer, a shop window or a big banner. The question everyone asks is the same — how big does it need to be so people can scan it?

There is no single magic number. Even GS1, the organisation behind retail barcodes, says "there isn't a definitive answer regarding the precise size" (GS1 UK). The right size depends on two things: how far away people stand and how many small squares your code has.

The quick answer

  1. Up close (cards, menus, labels): start at about 2.5–3 cm (1–1.2 in) wide.
  2. Arm's length (flyers, table tents, packaging): start at 4–5 cm (1.6–2 in).
  3. Across a room or a window: go much bigger, and scale up as the distance grows.
  4. Always keep a white border around the code and print one test copy at the real size before you print hundreds.

These are our suggested starting points, not a rule. The test print decides.

Why the size depends on the small squares

A QR code is a grid of small black and white squares called modules. A phone camera has to see each module clearly. GS1 calls the size of one module the X-dimension — "the size of the smallest square in your QR Code" (GS1 New Zealand).

So two codes printed at the same width can scan very differently:

  • A code with few modules (a short link) has big squares and scans easily, even when small.
  • A code with many modules (a long link, a full contact card, a lot of text) has tiny squares and needs to be printed larger.

That's why the best size trick isn't printing bigger — it's putting less data in the code. Use a short link where you can. A dynamic QR code also helps here: it stores only a short link on our site, so the code stays simple even if the page behind it is long.

How to work out a minimum size

If you like numbers, here's how the professionals do it. GS1's guidelines for QR codes on retail packs say the module size "must be a minimum of 0.396 mm and a maximum of 0.990 mm", with a target of 0.495 mm (GS1 UK). Those are for packs scanned up close at a checkout, so treat them as the smallest end of the scale.

To turn a module size into a printed size:

  1. Count the modules across your code (the small squares along one edge).
  2. Add 8 for the white border (4 modules on each side — see the next section).
  3. Multiply by the module size.

GS1's own example: a code 29 modules wide at the minimum 0.396 mm gives (29 + 8) × 0.396 = 14.65 mm, and at the maximum 0.990 mm it gives 36.63 mm (GS1 UK).

So a simple code can scan at under 1.5 cm from very close. For everyday print scanned by hand, go bigger.

Starting sizes for common uses

Where it's printedHow far people standSuggested starting width
Business card, product label10–20 cm2.5–3 cm (1–1.2 in)
Menu, table tent, receipt20–40 cm3–4 cm (1.2–1.6 in)
Flyer, worksheet, letter, packaging30–50 cm4–5 cm (1.6–2 in)
A4/Letter poster on a wall1–2 m10–15 cm (4–6 in)
Shop window, event sign2–3 m20–30 cm (8–12 in)
Banner, roll-up stand3 m and more30 cm and up (12 in and up)

These are our suggestions to start from. If your code has a lot of data (lots of small squares), move up a size. If people will scan it from a moving queue or in dim light, move up too.

Keep the white border (quiet zone)

Every QR code needs empty space around it so the phone can tell where the code starts. GS1 says the quiet zone on all four sides "is four times the size of the X-Dimension" — four modules (GS1 UK).

  • Don't let text, borders, photos or table lines touch the code.
  • Put any call to action ("Scan for the menu") outside that white border. GS1 says the same: "scan me" text "must be placed outside of the Quiet Zone".
  • Our frames already leave this space for you.

Colours and contrast

Size won't save a code the camera can't see. GS1 New Zealand advises: "Use dark colours on a light background. We suggest black with a white background", and to avoid reversing the colours (GS1 New Zealand). Our generator checks your colours and warns you if the contrast is too low.

Get a sharp file for print

A code that is the right size but blurry won't scan well either.

  • SVG is best for print. It's a vector file, so it stays sharp at any size — from a business card to a banner. Print shops usually prefer it.
  • PNG works too if you download it large. QR Hub lets you download PNGs at 512, 1024 or 2048 pixels. At a typical print quality of 300 pixels per inch, a 1024-pixel PNG is good up to about 8.5 cm (3.4 in), and a 2048-pixel PNG up to about 17 cm (6.8 in). For anything bigger, use the SVG.
  • Never stretch a small PNG up, and always resize from a corner so the code stays square.

Make this QR now

Putting the code in a Word or Excel file? See How to add a QR code to a Word document or Excel sheet.

Test before you print

This is the step that matters most.

  1. Print one copy at the real size on the real paper (or on normal paper, cut to size).
  2. Stand where your customers will stand — at the table, in front of the window, at the back of the queue.
  3. Scan it with two different phones, ideally one older one.
  4. If it takes more than a second or two, make the code bigger, shorten the link, or improve the contrast. Then test again.

Not sure how to scan without an app? Read How to scan a QR code on any phone without an app.

Common problems

  • It scans on screen but not on paper. It's too small for the distance, the print is blurry, or the white border is missing.
  • It works close up but not from the back of the room. Print it larger — the distance is the issue.
  • The code looks very busy. There's too much data in it. Use a shorter link or a dynamic code.

Printing a lot? Make it editable

If you're printing hundreds of flyers or a large sign, think about a dynamic QR code. You can change where it points later without reprinting, and its short link keeps the code simple, so it scans well at smaller sizes. A free QR Hub account includes 2 dynamic codes. Learn the difference in Do QR codes expire?

For business cards, our Business card QR code guide has more tips on fitting a code on a small card.

Start with the table above, keep the white border, and test one print first.

Contents

  1. The quick answer
  2. Why the size depends on the small squares
  3. How to work out a minimum size
  4. Starting sizes for common uses
  5. Keep the white border (quiet zone)
  6. Colours and contrast
  7. Get a sharp file for print
  8. Test before you print
  9. Common problems
  10. Printing a lot? Make it editable

Make your QR code now

Free static QR codes with no sign-up and no expiry. Editable codes with scan stats when you need them.

Make this QR now

Related articles

  • How to add a QR code to a Word document or Excel sheet7 min read
  • QR code scams: how to spot a fake code before you scan5 min read
  • Instagram or TikTok QR code: get more followers from your shop, flyer or stand4 min read
QR Hub

Free QR codes for everyone, with codes you can edit after printing.

QR codes

  • Link
  • WhatsApp
  • Wi-Fi
  • Menu
  • Business card
  • Location
  • Song
  • Google reviews
  • Invitation
  • PDF
  • Scan a QR code
PricingBlogTerms of ServicePrivacy PolicyRefundshello@qrhub.shop

© QR Hub

Englishen

Made in Saudi Arabia 🇸🇦